Raytheon Pathfinder ECDIS Operator's Manual page 247

(6)
This function is controlled by a loaded route.
In this case it is possible to place one or more Text Points in the route area.
A text editor window allows the user to specify the text point,
Step 6.1 Click on Insert.
Step 6.2 Position the target cursor over the desired point and press the Enter
Step 6.3 Click on Edit for editing or changing later.
Step 6.4 Click on Delete for deleting a desired text point.
Step 6.5 Select the OK button, if the a route changing is finished.
Step 6.6 To save the route using the same name, click on OK. If you want to
Edition: 30.MAR.2007
Operator Manual
Text Point: Insert selected (see Figure: 1−11)
key.
A symbol marked the point, the text editor window appears to specify
the point. The first 10 characters appears as point label in the chart.
Then click OK.
Position the cursor over the desired point and press the Enter
key.
The Save Route dialogue box.
save the route using a new name of up to 25 characters, then click on
OK. If you do not want to save your changes, click on Cancel.
Figure: 1−11 Create a Text point
ECDIS
8−19
R
Raytheon Anschütz GmbH
Germany
3655DOC020102