Raytheon Pathfinder ECDIS Operator's Manual page 326

Limits for Dangerous Targets
− The limits for CPA () and TCPA () to generate Dangerous Target Alarms
− It can be defined whether the CPA limit, the TCPA limit or both values will
Procedure: (see Figure: 12−5)
Step 1 Select AIS Options.. from the Integration menu.
Step 2 Click on the OK button. The AIS presentation changes, the dialog
Step 3 Click on the AIS Info button, the AIS Information window appears.
Edition: 30.MAR.2007
Operator Manual
can be adjusted.
cause Dangerous Target Alarm.
Figure: 12−4
The Dialog box appears.
Select and change the AIS Options... and Limits for Dangerous Targets.
box is closed.
Or click on the Cancel button, all changes are discarded.
The dialog box is closed.
This dialog can also be accessed by cursor, right clicking
[Query] trackball button on an AIS Target.
For changing the selected AIS Target, place the cursor at a User ID and
click on the left button [Enter]. Or place the cursor on an AIS Target in
the chart and click on the right button [Query].
ECDIS
AIS Options menu
12−7
R
Raytheon Anschütz GmbH
Germany
3655DOC020102