Raytheon Pathfinder ECDIS Operator's Manual page 202

Procedure:
Step 1 Select the display menu (see Figure: 1−1).
Step 2 Select View Area. The dialog box appears.
6.1.5.1 Save an Area
Procedure:
Step 1 Select the display menu (see Figure: 1−1).
Step 2 Select View Area. The dialog box appears.
Step 3 Set the display to the chart and dimensions you want to save.
Step 4
Step 5
Plot and route information is not saved with an Area.
3655DOC020102
Operator Manual
The names of all the areas you have saved appear in the list box.
When you select an area name, its scale and center are displayed at
the bottom of the dialog box. If there are no areas listed, the scale and
center of the current display is shown.
Figure: 1−6 View Area dialog box
Click in the text box, then type an area name of up to 25 characters.
Click on Save.
NOTE
Step 3 Step 3
6−8
Edition: 30.MAR.2007