7.1.8
Anchor Watch
ECDIS can monitor the drift of the ship while anchored. When Own ship (DR
Point) travels outside the range, ECDIS gives an audible alarm and displays a
warning message.
Procedure: (see Figure: 7−11)
Step 1 Select the ship menu (see Figure: 7−1).
Step 2 Select Anchor Watch.... The dialog box appears.
Step 3 Click inside the Anchor Watch Enabled check box. The ship's
When you re−open the Anchor Watch dialog box, the displayed position
is the position of the ship when you enabled Anchor Watch. To re−set
the anchor watch to the current ship's position, disable the Anchor
Watch Enabled check box, then re−enable it
Step 4 Enter the range (distance from start position) for which you want
Edition: 30.MAR.2007
ECDIS
Operator Manual
current location appears beneath the check box.
ECDIS to give a warning if crossed by own ship.
Anchor watch Range
Figure: 7−11 Anchor Watch Dialog Box
7−17
NOTE
.
Step 3
Step 4
R
Raytheon Anschütz GmbH
Germany
3655DOC020102