Raytheon Pathfinder ECDIS Operator's Manual page 241

8.2.1.2 Performing Actions in a loaded Primary or Secondary Route
Procedure: (using the menu structure)
Step 1 Select the route menu (see Figure: 1−5).
Step 2 If no route loaded select Open Route then e.g. Primary Route. Select
Step 3 Select Edit Route then Primary or Secondary Route.
Procedure: (using the pop up window per cursor)
Step 1 Place the cursor on a waypoint and click on [Query] button.
Step 2 Select Change Primary Route entry.
1
2
3
4
5
6
Figure: 1−8 Change Primary Route dialog box (Track Control not active)
(1)
Extending a route is as simple as entering new waypoints − ECDIS
automatically adds them to the end of the route. Use the Edit Route command to
enter waypoints just as you do when creating the route; either select their
location in the display or specify their coordinates in the Latitude and Longitude
Edition: 30.MAR.2007
Operator Manual
the desired route from the Open Primary Route list box.
The Change Primary Route dialog box appears.
The pop up window appears.
Option button Route: Extend selected
ECDIS
8−13
R
Raytheon Anschütz GmbH
Germany
7
3655DOC020102