Raytheon Pathfinder ECDIS Operator's Manual page 245

Step 3.2 Label the waypoint by typing a label of up to 10 characters in the
Step 3.3 Enter a turn radius for the waypoint by clicking in the Radius text box
Step 3.4 Select the OK button, if the a route changing is finished.
Step 3.5 To save the route using the same name, click on OK. If you want to
Edition: 30.MAR.2007
Operator Manual
or Using waypoint list in the dialog box
Click on the waypoint that will precede the inserted waypoint.
Click on Accept. In the Waypoint list box, click on the waypoint that will
follow the inserted waypoint. Click on Accept. Enter coordinates of the
inserted waypoint in the Latitude and Longitude boxes, click on
Accept.
If you are inserting a waypoint before the first waypoint, click on the
first waypoint in the list box. Click on Accept.
Enter coordinates of the inserted waypoint in the Latitude and
Longitude boxes, click on Accept.
Label box.
and entering the desired value.
The Save Route dialogue box appears displaying the name of the
route.
save the route using a new name of up to 25 characters, then click on
OK. If you do not want to save your changes, click on Cancel.
ECDIS
8−17
R
Raytheon Anschütz GmbH
Germany
3655DOC020102