Raytheon Pathfinder ECDIS Operator's Manual page 259

Column
Waypoint Num
Waypoint Label Waypoints label.
Latitude
Longitude
Plan Spd
Brg Next
Dist. Next
Dist. Made
Dist. to Go
TTG
At the bottom of the window, ECDIS displays the current ship's position and the
bearing and range to the active waypoint.
An asterisk marks the active waypoint.
8.2.7 Clearing Routes from the Display
When you have finished navigating a route, you can clear it from the display
using the Clear Route command. Be sure to save a new or updated route before
using this command. This command does not delete the route from the route list,
it only removes the route from the display.
Procedure: (see chapter 8.2.1.1)
Edition: 30.MAR.2007
ECDIS
Operator Manual
Table 8−2 Waypoint List Column Definitions
The waypoints numerical position in the route.
Waypoints latitude.
Waypoints longitude.
Planned speed for the route leg (e.g. from waypoint 1 to waypoint 2)
Bearing from that waypoint to the next waypoint.
Distance between that waypoint and the next waypoint.
Distance traveled so far. This is continually updated.
The route distance to the last waypoint in the route from the current ship
position.
Time to Go; the time needed at the current speed to reach the next waypoint.
Contains
8−31
R
Raytheon Anschütz GmbH
Germany
3655DOC020102