Raytheon Pathfinder ECDIS Operator's Manual page 334

Procedure: (see Figure: 12−9 and Figure: 12−10)
Step 1 Select ARPA Radar Tracking.. from the Integration menu.
Step 2
Edition: 30.MAR.2007
ECDIS
Operator Manual
The Dialog box appears.
If you have more then one radar integrated with ECDIS, click
on the option button of the radar you wish to display.
If there are two or more Radar configured, you can also select to
enable all Radars. In this case the ARPA targets and the Radar cursor
(if enabled) of all Radar are displayed.
The target labels are preceded by the Radar letter and the Radar
cursors are labeled with the Radar letter.
To turn on perform the following:
− Radar Tracking Click on On in the Radar Tracking area.
− Target Trails Click on On in the Target Trails area.
− Heading Vector Click on On in the Target Heading Vector area.
Click on OK.
Figure: 12−9 ARPA Radar Tracking dialog box
12−15
R
Raytheon Anschütz GmbH
Germany
3655DOC020102