Raytheon Pathfinder ECDIS Operator's Manual page 61

Call Out Description
15. Waypoint Next − Next waypoint no. and waypoint position
Track Crs.
16. UTC − shows the Co−ordinated Universal Time.
Local Time
2.7.1 Operational Steering Modes of ECDIS
ECDIS may function in one of three different steering modes. The mode in which
you are working is defined by the functions you are performing. In the Waypoints
menu, a check mark appears next to the command name of the mode in which
you are currently operating.
Mode selection is made by using the Steer Manually, Steer to Track, or Steer to
Course/Heading menu commands under the Waypoint menu. You may transit
between modes just by selecting a different command. When you switch
between modes,
ECDIS displays a message box asking you to confirm the change:
When you switch between operational modes the following changes occur:
Edition: 30.MAR.2007
Operator Manual
− Display's the current Track Course in [deg] from the previous waypoint to the
next waypoint.
Track Control Warning Message
Figure: 1−30
• Switching from Steering to Track to Course Control − The autopilot is
turned off, the active waypoint is cleared, and Manual Steering appears
in the information panel.
• Switching from Steer to Course/Heading to Manual Steering −
The autopilot is turned off, the course line is removed, and Manual
Steering appears in the information panel.
ECDIS
2−31
R
Raytheon Anschütz GmbH
Germany
3655DOC020102