5.3.5
Overlays
This menu item allows the user to select the SENC information (System
Electronic Navigational Chart) to be displayed on the current chart.
Procedure: (see Figure: 1−35 and Figure: 1−36)
Step 1 Select DNC Options (see Figure: 1−1).
Step 2 Select Overlays. The Dialog Box appears.
Base Display permanently retained on the ECDIS display, consisting of:
1 coastline (high water);
2 own ship's safety contour (to be selected by the mariner);
3 indication of isolated underwater dangers of depths less than the safety
4 indication of isolated dangers which lie within the safe water defined by the
5 traffic routing systems;
6 fixed and floating aids to navigation;
Standard Display to be displayed when the chart is first displayed by ECDIS,
consisting of:
1 the Base Display plus;
2 drying line;
3 boundaries of fairways, channels, etc.;
4 visual and radar conspicuous features;
5 prohibited and restricted areas;
Edition: 30.MAR.2007
Operator Manual
Figure: 1−35
contour which lie within the safe waters defined by the safety contour;
safety contour such as bridges, overhead wires, etc., and including buoys
and beacons whether or not these are being used as aids to navigation;
ECDIS
DNC Overlays
5−39
R
Raytheon Anschütz GmbH
Germany
3655DOC020102