Raytheon Pathfinder ECDIS Operator's Manual page 243

The value for the turning arc/radius is limited to 135_. If this Limit is
exceeded while planning a route a message window pop−up giving
respective information.
Step 2.2 Select the OK button, if the a route changing is finished.
Step 2.3 To save the route using the same name, click on OK. If you want to
In this case you can change a selected waypoint by changing the Radius or
the label
Edition: 30.MAR.2007
ECDIS
Operator Manual
Figure: 1−9 Note when turn arc/radius greater than 135_
The Save Route dialogue box appears displaying the name of the
route.
save the route using a new name of up to 25 characters, then click on
OK. If you do not want to save your changes, click on Cancel.
see Step 2.1
( ).
NOTE
8−15
R
Raytheon Anschütz GmbH
Germany
3655DOC020102