Raytheon Pathfinder ECDIS Operator's Manual page 35

4
5
6/
1
7
8
9
10
11
12
13
14
15
16
Edition: 30.MAR.2007
Operator Manual
Anti−clutter filter ON/OFF, press the button.
In case of heavy clutter developing on the Radar Video, the NSC computer
creates a profile of the echo. Within this profile, the received echoes are
monitored for a certain period (Scan−to−scan method). Irregular echoes are
suppressed on the Radar Video. Regular echoes are indicated on the Radar
Video.
Hides the symbols in the radar video.
Press the button and the artificial symbols will disappear. Press again to show
the symbols.
Symbols are EBLs, VRMs, PL, ARPA zones, MAPs.
Status indicators, press toggle switch (7). The activated function is indicated by
( ). Use the dial (11) to adjust EBL. Use the dial (16) to adjust VRM.
Toggle switch. Can be switched between upper position, Gain / Sea and lower
position, VRM / EBL. See status indicators (1/6) and use dial (16) or dial (11).
Toggle switch. Range selection, switches the radar ranges up and down.
ECDIS function: Zoom in or out.
Radar and ECDIS:
Alarm indicator (flashing) and alarm acknowledgment
Radar and ECDIS:
Dimmer buttons for button illumination and radar display backlight.
Press both buttons to switch between Day/Night mode.
6/
Dial, see .
1
Press button until the desired values is indicated. The Trails indicator changes
to the next higher mode.
The steps available are OFF, 1.0, 3.0, 6.0, OFF, see TRAILS toggle field in infor-
mation panel.
Press and hold the button. The Heading Line disappears during this time.
Press button to change VECTOR LENGTH.
Center to reset your own ship to the middle of the PPI or to activate OFF
Center.
Dial, see 1/6.
ECDIS
2−5
R
Raytheon Anschütz GmbH
Germany
3655DOC020102