Raytheon Pathfinder ECDIS Operator's Manual page 237

8.2.1 Edit Route Command
When you choose the Edit Route command, ECDIS displays the Edit Route
dialog box with the name of the open route (Primary or Secondary) in the title
bar.
Before creating a new primary or secondary route the last primary or secondary
route has to be cleared.
Procedure:
Step 1 Select the route menu (see Figure: 1−5).
Savety checks
While you are entering waypoints, ECDIS automatically checks the route and
fairlane (cross track limits) for unsafe and restricted areas as well as to see if
they are reasonable (relative to their geometrical coordinations). If the fairlane or
route is not reasonable, and cannot be created, one of the two following
message boxes will appear, see Figure: 1−6.
When these message boxes appear, you will not be allowed to enter this part of
the route. Acknowledge the message box by clicking on OK. If the route action is
Edition: 30.MAR.2007
ECDIS
Operator Manual
a) For creating a new route, see chapter 8.2.1.1.
b) For performing actions in a current loaded primary or secondary
route, see chapter 8.2.1.2.
Step 1
Figure: 1−6 Route Warning Messages
8−9
R
Raytheon Anschütz GmbH
Germany
3655DOC020102