Table of Contents
Advertisement
ActiveScale™ X100 Installation Guide
If you enter an invalid SSL certificate, SSL will be disabled until you enter a
valid certificate through ActiveScale SM.
g. Type the IP address(es) of the DNS server(s) you want the system to connect to.
h. Type the IP address(es) or fully qualified domain name(s) (FQDN) of the NTP servers you want
the system to connect to.
i. Specify how the system will send notifications.
Tip: You can specify an SMTP Server as an IP address or a fully qualified
domain name (FQDN). The system applies the SMTP and SNMP settings to all
three sites; you can change any site's settings through ActiveScale SM later.
Tip: Sending a test e-mail is optional. Default is No.
j. Type the system's S3 domain name(s).
Figure 5-70. Post-Login > S3
68
Advertisement
Table of Contents
