Table of Contents
Advertisement
ActiveScale™ X100 Installation Guide
Table 1-26. ActiveScale X100 identification
On rackless or re-racked systems, component location may vary.
1.2 System specification summary
The following table is a summary of specifications relevant to the ActiveScale X100.
Condition (fully configured)
Altitude
Packed system dimensions
Non-operating
-984 ft to 39,3711 ft
(-300 m to 12,000 m)
• Width—41.4 in (1052 mm)
• Depth—61.41 in (1560 mm)
• Height—88.3 in (2243 mm)
11
Number
1
(Optional) System Expansion Nodes.
System Expansion Nodes are available
as part of the System Expansion Node
kit. Each kit contains one System
Expansion Node.
2
Management Interconnect
3
System Interconnects (blanking panels
not shown)
Note: There is no requirement to leave
space between System Interconnects in
a racked system.
4
System Nodes
5
Storage Nodes
6
Storage Enclosure Basics
N/A
PDUs
On a standard system, either two or
three 3-phase, or four single-phase
PDUs are attached at the back of the
rack on either side of the cabinet.
On a rackless system, PDUs are
supplied by the customer and their
installation location may vary.
Operating
-984 ft to 10,000 ft
(-300 m to 3048 m)
Component
Advertisement
Table of Contents
