Table of Contents
Advertisement
ActiveScale™ X100 Installation Guide
Note: Complete the steps in
before starting the post-login configuration.
Tip: All fields in the post-login configuration wizard are mandatory unless
otherwise noted.
1. Start the post-login configuration wizard.
a. Repoint your browser if necessary.
•
If you disconnected your laptop from the System Node's eth2 port while waiting for the pre-
configuration phase to complete, navigate to any of these URLs using a desktop web browser:
https://SystemNode1_PublicNetwork1_IP:10443/
https://SystemNode2_PublicNetwork1_IP:10443/
https://SystemNode3_PublicNetwork1_IP:10443/
•
Otherwise, if your laptop is still connected to the System Node's eth2 port and your web
browser is still pointed at
b. Log into the configuration wizard with username
The post configuration wizard appears.
Figure 5-40. Post-Login > EULA
Connect the system to your networks
https://169.254.140.1:10443/
admin
37
on page 34
, click Proceed.
and password
Administrat0r$
.
Advertisement
Table of Contents
