Table of Contents
Advertisement
ActiveScale™ X100 Installation Guide
14. Click Apply.
The Apply Configuration page appears, with an estimate of the time remaining. Estimated
completion times are based on your system's configuration.
Warning: Do not click your web browser's Back button while the Apply
Progress page is displayed.
Figure 5-66. Pre-Login > Apply Configuration
Important: If the Configure networks task fails, this means that the network
stress test has failed; by default this test creates a total of 1000 connections with
100 parallel connections between 2 remote nodes. Each connection copies 1000
bytes. Contact Western Digital Support.
15. Wait until the Pre-Configuration icon has a check mark and the Post-Login Configuration image is
highlighted, as shown in the image below.
63
Advertisement
Table of Contents
