Programming The Pdus; Connecting To The Pdu With A Serial Port - Western Digital ActiveScale X100 Installation Manual

ActiveScale™ X100 Installation Guide
C-13 2.02
C-13 1.15
C-13 1.16
C-13 4.3
C-13 1.06
9.69 Total
Plug Current (A)
C-13 1.15
C-13 1.15
C-13 4.3
C-13 4.3
10.9 Total
Plug Current (A)
C-13 2.02
C-13 1.15
C-13 4.3
C-13 1.16
9.69 Total

9.6.2 Programming the PDUs

PDU reprogramming is done using the PDU firmware CLI. You can access the CLI using one of the
following methods:
• A serial (RS232) port
• An Ethernet port

9.6.2.1 Connecting to the PDU with a serial port

The PDU has an RJ45 serial RS-232 port. Use a RJ45-to-DB9F serial port adapter to connect using a PC or
networked terminal server.
Serial port connections require either a terminal or terminal emulation software configured to support
VT100/ANSI. The serial port also requires the following settings:
System Expansion Node 3 28
Storage Node 5
System Node 3
Storage Enclosure Basic 5 23
System Interconnect 2
Branch YZ
Component
Storage Node 4
Storage Node 3
Storage Enclosure Basic 4 15
Storage Enclosure Basic 3 13
Branch XY
Component
System Expansion Node 1 8
Storage Node 2
Storage Enclosure Basic 2 6
System Node 1
121
30
26 50
24 20
10
22 0
Port Time on (s)
17 60
16 50
40
10
Port Time on (s)
30
7 60
50
3 10