Table of Contents
Advertisement
ActiveScale™ X100 Installation Guide
Figure 5-63. Pre-Login > Global Review (secondary sites)
10. (Optional) On the configuration wizards at the secondary sites, review the settings and click Confirm
to apply the settings, or Edit to make changes.
11. (Optional) On the configuration wizard at the primary site, wait for confirmation from the secondary
sites.
12. Write down the public IP address for System Node 1 as shown on the Global Review page.
Important: The system redirects login access to the public IP address of System
Node 1 after pre- login configuration completes. Without knowledge of this IP
61
Advertisement
Table of Contents
