Table of Contents
Advertisement
ActiveScale™ X100 Installation Guide
1. Attach the outer rails to the rack.
Note: Verify that you are installing the correct rail on each side of the rack. The
rear of each rail is marked with "rear".
a. Extend the outer rail enough that it extends between the two vertical rails of the rack.
Figure 9-2. Expand the outer Rail
b. Position the hook on the rear outer rail around the rear vertical rail.
c. Slide the rear outer rail pegs into the desired slots.
d. Position the hook on the rear outer rail over the rear vertical rail and then slide the rear outer rail
pegs into the desired slots.The clip at the rear of the rail kit is installed over the rack rail to hold it
in place.
Figure 9-3. Rail attaching to rear vertical rail
114
Advertisement
Table of Contents
