Table of Contents
Advertisement
ActiveScale™ X100 Installation Guide
If the scale up job fails, click the icon in its Details column to see why it failed and suggestions on
how to correct the problem. Follow the suggestions.
7. Check the dashboard to confirm that the added capacity is reflected in the Capacity tile.
Figure 7-96. Scale up: Confirmation on dashboard
8. Check the Resources page to confirm that the newly provisioned sled is present.
Figure 7-97. Scale up: Confirmation on Resources page
7.3 Provisioning the newly added sleds on a multi-site system
Follow this procedure after you have completed the hardware steps for a single scale up kit. Each system
must have identical scale up configurations.
Note: During the scale up process, the system will be unbalanced (in other
words, have different capacities at different sites) for more than a day. This
91
-
Advertisement
Table of Contents
