ActiveScale™ X100 Installation Guide
3.1 Packaging inspection
Important: Ensure that all ShockWatch and TiltWatch sensors are checked and
recorded.
As you unpack the system, look for obvious signs of damage. The following scenarios are the most
common ways a package can be damaged:
• Crushed corners caused by dropping the package.
• Split seams caused by excessive shearing force placed on the container.
• Punctures caused by a sharp object striking the packaging.
• Water damage caused by contact with a water source or storage in an overly humid environment.
3.2 Unpacking the ActiveScale X100
The ActiveScale X100 ships on a padded pallet containing mounting hardware and system unloading
ramps.
To unpack the ActiveScale X100:
1. On the cardboard side panels, verify that the ShockWatch and TiltWatch sensors have not been
tripped. If any of the sensors have been tripped, report the damages to Western Digital Corporation
Support.
2. Cut the plastic bands holding the top cap to the cardboard panels.
Figure 3-18. Removing the plastic bands
20