Table of Contents
Advertisement
ActiveScale™ X100 Installation Guide
7. On each configuration wizard, click each tab on the Site Review page to review your IP assignments.
Warning: It is crucial that you correct any errors on this page. To make
corrections, click Back and edit the settings.
Warning: Once you navigate forwards to the Apply Progress page, you can no
longer change Storage Network 1 and Storage Network 2 settings.
Note: You cannot edit the settings for Public Network 1 or Public Network 2.
a. Click the PUBLIC tab.
The wizard displays the IP addresses for Public Network 1 and Public Network 2. Check each IP
assignment to make sure it's correct.
b. Click the MANAGEMENT tab.
The wizard displays the IP addresses for System Network 1 and System Network 2. Check each
IP assignment to make sure it's correct.
c. Click the STORAGE tab.
The wizard displays the IP addresses for Storage Network 1 and Storage Network 2. Check each
IP assignment to make sure it's correct. Verify that the IP addresses displayed under the columns
IP Address 1 and IP Address 2 do not conflict.
Figure 5-59. Pre-Login > Site Review > Storage
58
Advertisement
Table of Contents
