Table of Contents
Advertisement
ActiveScale™ X100 Installation Guide
Figure 9-9. System Expansion Node: Summary of scan
2. For each site, validate the network settings in each tab against your settings as specified in your
ActiveScale X100 Site Survey, and/or change the Storage Network settings.
Tip: You can change the 4th octet of the new system's Public Network IP
addresses. System Network addresses are carried forward from the existing
system(s), so you cannot change them.
3. Click Next to review inputs.
Important: On multi-site deployments, the wizard presents two levels of tabs. It
is critical that you review all the details. In other words, you must review Site
1's network settings in each tab, Site 2's network settings in each tab, and Site 3's
network settings in each tab.
4. When you reach the last tab, click Proceed.
132
Advertisement
Table of Contents
