Table of Contents
Advertisement
ActiveScale™ X100 Installation Guide
8. Install the I/O module into the Storage Enclosure Basic.
a. Set the I/O module half-way into the Storage Enclosure Basic chassis with the handle still
unlocked.
Figure 7-89. Sliding the I/O module into the chassis
b. Plug the HD miniSAS cables into the HD miniSAS ports.
c. Route the power cords through the I/O module handle.
Important: Do not plug in the PSUs until the I/O module is fully seated.
d. Push the I/O module into the chassis until seated against the sleds.
e. Lock the I/O module handle by pushing rotating the I/O module handle up.
Figure 7-90. Locking the I/O module
86
Advertisement
Table of Contents
