ActiveScale™ X100 Installation Guide
The figure below illustrates the location of the eth2 port.
Figure 5-27. System Node eth2 port
b. Give your laptop an IP address in the same range as the System Node's default link local IP
address for eth2,
For example,
Laptop IP address:
Subnet mask:
Gateway:
169.254.140.1
c. Ping
169.254.140.1
If ping results do not confirm a connection, review your laptop's network configuration.
2. Using a supported web browser, navigate to
Note: ActiveScale SM is compatible with Chrome v63-65 and Firefox v57-59.
Desktop versions only.
The pre-login configuration wizard's Introduction page appears.
Figure 5-28. Pre-Login > Introduction
.
169.254.140.1
169.254.140.2
255.255.255.0
from your laptop, to confirm that you can reach it.
https://169.254.140.1:10443/
30