Table of Contents
Advertisement
ActiveScale™ X100 Installation Guide
BMC addresses are not pingable Western Digital Support must correct the
problem (fix unreachable BMCs) first.
Note: Complete the steps in
before starting the post-login configuration.
Tip: All fields in the post-login configuration wizard are mandatory unless
otherwise noted.
1. Start the post-login configuration wizard.
a. Using a desktop web browser, navigate to
https://SystemNode1_PublicNetwork1_IP:10443/ on the primary site.
b. Log into the configuration wizard with username admin and password Administrat0r$.
The post configuration wizard appears.
Figure 5-68. Post-Login > EULA
Connect the system to your networks
65
on page 52
Advertisement
Table of Contents
