Table of Contents
Advertisement
ActiveScale™ X100 Installation Guide
Condition
Quantity (per system) 4
Plug standard
NEMA L6-30P
Outlet standard
NEMA L6-30R
Weight
18 lbs (8.1 kg)
Dimensions
• Width—2.2 in (56 mm)
• Depth—2.3 in (56 mm)
• Height—69 in (1753 mm)
Rack position
Rear of the rack 0U
Operating temperature 32°F to 140°F
(0°C to 60°C)
B.4.1 Power cords
Use only tested and approved power cords that are connected to either:
• Properly grounded power outlets.
• The insulated sockets of the rack internal power supply.
If an AC power cord was not provided with your product, purchase one that is approved for use in your
country.
To avoid electrical shock or fire, check the power cords that will be used with the product as follows:
• The power cord must have an electrical rating that is greater than that of the electrical current rating
marked on the product.
• Do not attempt to modify or use the AC power cord(s) if they are not the exact type required to fit into
the grounded electrical outlets.
• The power supply cord(s) must be plugged into socket-outlet(s) that is /are provided with a suitable
earth ground.
• The power supply cord(s) is / are the main disconnect device to AC power. The socket outlet(s) must
be near the equipment and readily accessible for disconnection.
B.5 Rack specifications
The following table lists the rack specifications for the racked
ActiveScale X100 use customer-supplied racks.
Single-phase NEMA L6-30P
Single-phase IEC 60309 24A 2P+E
4
IEC 60309 32A 2P+E
IEC 60309 32A 2P+E
18 lbs (8.1 kg)
• Width—2.2 in (56 mm)
• Depth—2.25 in (58 mm)
• Height—69 in (1753 mm)
Rear of the rack 0U
32°F to 140°F
(0°C to 60°C)
ActiveScale X100. Rackless versions of the
148
Advertisement
Table of Contents
