Table of Contents
Advertisement
88
10.SetMode
( 10-8 MEMORY
J
Memory function settings will be explained in this section.
1.Select "MEMORY" from the Set mode menu.
2.By pressing the dial, the sub menu will appear.
10-8-1 Bank-Link Setting Function
When scanning the memories, you can combine the banks that you want to scan
into scanning groups. 10 pairs of groups can be set, and the 10 pairs correspond
to
keys from
([7
to@.
•How to set the bank link function.
1.Rotate the upper dial and select "Bank link".
·
pRJO
CALL
2.Press the keys from
Cf}
to
\9'i'tl
and select
the group number you want to edit.
Iii
B S
\iii
223.500
Bank-link GRP. 0
BANK 0 LINK OFF
'.
3.Rotate the lower dial and select the bank you want; the group will be
registered by pressing the
(fib
key and by indicating "Yes" on the display.
By pressing the
l§7
key again, "No"
will
be displayed, and the operation is
cancelled.
•When confirming the details of a specific group, select the group and rotate the
lower dial. The links of respective banks
will
be indicated.
·The used of the free - utility program makes it much easier to manage Bank - Link
memories.
Advertisement
Table of Contents
