Table of Contents
Advertisement
8.Functions Allotted to the Keypad
( 8-5 Tone Squelch Function/DCS Function Settings )
Two different selective-calling tones, CTCSS (PL} and DCS, are available.
When you transmit using previously selected tone signals, these functions allow
signal reception by opening the squelch only when the tone signals of your station
and the tone squelch or DCS code signals of another party's station correspond
with each other.
When receiving in dual band mode, the tone squelch function or the DCS function
will only be valid on one band.
0
•The tone squelch function and the DCS function can't be used at the
same time.
CAUTION
8-5-1 Tone Squelch Function
There are three types of tone squelch functions:
Tone (CTCSS encode):
This function can be set only to encode. It can be used to access a
repeater.
Tone Squelch (CTCSS ENC.IDEC.):
By using the encoder/decoder functions, you can use the selective receive
option.
Reverse Tone Squelch (CTCSS EID REV.):
This is a setting for the decoder function and the squelch closes when the
receiving signal has been set with CTCSS tone.
g..,,
1.Press the
Cfllili£)
key and light
Ii
on the
display.
2.Press the
{El
key several times and select
"CTCSS encode", "CTCSS ENC./DEC."
and "CTCSS EID REV.".
rm
T
BS~
223.500
CTCSS encode
88. 5Hz
'
"
53
Advertisement
Table of Contents
