Table of Contents
Advertisement
7.Memory Mode
·Memory Channels
The memory channels that can be registered according to the types of banks
are as follows:
0-4
I
From 000 to 099
PRG
From OA to 498
DUAL
From 000 to 099
PRIO
From 000 to 049
CALL
222MHz band call channel: VHF
902MHz band call channel: UHF
PASS
From 000 to 099
4.Register by pressing the
!fiJ
key.
It returns to the former operating mode after registering.
Example: When registering 223.SOOMHz from the main band on Bank 1 in
the 002 channel.
•
MEMO
0
CAUTION
1.0n the main band, select the VFO mode and tune to 223.500MHz.
2.Press
the~
key.
3.Rotate the main lower dial and set the bank to "1 ".
4.Rotate the main upper dial and set the memory channel to "002".
5.Press the
If#
key and the registration is done.
•It is not possible to overwrite memory channels in default condition .
To delete or edit memory channels, you must cancel or temporarily
release the "Over Write Function (P.89)" before performing such
actions.
·By
downloading
free
software
from
our
website
(http://www.alinco.com) and using the optional PC connecting cable
(ERW-7/ERW-4C with EDS-10/14 conversion cable), memory channel
allocations within the 50 banks can be modified. This operation
cannot be done with simple button operations on the transceiver.
"'Dual Bank" can only be selected when two bands are displayed
simultaneously.
•Banks for Program Scan Channels register two frequencies
such as
OOA
and
00
B.
For example: When 223.520MHz is registered on 01 A and
223.600MHz is registered on 01 B;
When using Program Scan, the receiver will
scan within the range of 223.520MHz to
223.600MHz.
41
Advertisement
Table of Contents
