Table of Contents
Advertisement
Ill
70
10,Set Mode
•How to enter the Set mode
1.Press the
\::~
key to show
II
on the display.
2.By pressing the dial, the transceiver enters the Set mode.
3.Rotate the upper dial and select the
desired menu of the set mode.
4.When you press the dial, the sub menu
will be displayed.
IJjj
ss
9
223.500
' "
(SCREEN DISPLAY)
5.Rotate the upper dial and select the sub menu; then rotate the lower dial to
change the setting.
6.By pressing the [MON!] key, the display will return to the set mode menu •
7.By pressing the [PTT] key, the settings of the set mode
will
be in place and
the procedure
will
be completed.
( 10-1 SCREEN DISPLAY
Display parameters and the illumination setting are included in this menu item.
1.Select "SCREEN DISPLAY" from the menu of the Set mode.
2.By pressing the dial, the sub menu
will
appear.
10-1-1 Language
The language can be set to either Japanese or English.
1.Rotate the dial and select
"language/~~"
"language/
~ ~"
will
be displayed as shown on
the right
Ii]
B S
tii)
2.Rotate the lower dial and select "8
*
~"<->"English".
223.500
language/
a~
English
e
M
)
Advertisement
Table of Contents
