Table of Contents
Advertisement
1.ChoOSj. the operation
6
band by pressing
the
fijJ
key or the
rsuBJ
key.
The frequency of me chosen band is
indicated in large characters in dual band
displays.
In mono band display, only one frequency is
shown.
~
e
2.By pressing the
JilJi)
key or the
tifi1
key
successively, the band changes.
5.Basic Operation
(ii
SS~
\JFO
223.500
FM
VFO
915.000
FM
El
ss@!}
VfiO
233.500
FM
\JfiO
9i5.000
•
•Another way to switch 222 and 902MHz band is to rotate the upper dial
while pressing and holding the§!} or the
€fi
key.
MEMO
·Iii
indicates that the main band is the operation band and
the§ indicates that the sub band is the operation band.
5-7-1 Operating in Mono Band
•To operate the main ba_,'1d as mono band.
1.Press and hold the
{jjjfl
key continuously
for approximately one second.
The main band is displayed as the mono
band. In order to return the main band to dual
band, repeat the same step.
•To operate the sub bane& in mono band.
1.Press and hold the
fjfjj}
key continuously
for approximately one second.
The sub band is displayed as the mono band.
In order to return the sub band to dual band,
repeat the same step.
Iii
BS~
VfiO
223.500
FM
BS~
VfiO
915.000
FM
5-7-2 Switching the Sub Band and Main Band Frequencies
When setting both the main band and the sub band to the amateur transmitting
and receiving bands, this transceiver allows exchanging frequencies of the sub
band and main band.
1.Press the
~key.
s
2~Press the
/ii)
key.
By following these steps, the frequencies of the sub band and the main band are
exchanged.
33
Advertisement
Table of Contents
