Table of Contents
Advertisement
ID
98
11.Channel Indication Mode
11.
Channel Indication Mode
This mode displays just the bank and channel number of a memory channel,
instead of frequencies, and limits other functions in the memory mode.
1.Memories must have been registered previously.
2.Set the transceiver to the memory mode and turn it off.
3.Turn
!t1~
transceiver on while pressing
the
1fip
and the [PTT] keys.
The isplay will be shown as on the right.
To exit the channel indication mode, turn the
transceiver off, and turn it on while pressing
the
tl/i}
and the [PTT] keys.
I
'c
1-
o,
bank
memory channel
F M
•
MEMO
•When the transceiver is in the channel indication mode, operations are
limited to changing the banks and channels, adjusting the volume,
adjusting the squelch, MONl/MUTE function operations, memory scan
operations and keylock operations.
•When a channel name is registered, the channel name will be displayed.
•Even when the transceiver is reset, the channel indication mode can't be
released unless the procedure described above is performed again.
Advertisement
Table of Contents
