Registering Memory Channels - Alinco DJ-G29T Instruction Manual

40
7.Memory Mode
[ 7 -2 Registering Memory Channels
J
The steps for registering memories in the DJ-G29T are as follows:
1.Set the frequency and other operating parameters you want to register in
VFO mode.
The following can be registered in a memory channel:
•Frequency
•Tone frequency
·DCS codes
·Modulation mode
•Tone squelch/reverse tone squelch/DCS
·Memory name
·Skip settings
·Shift settings
Q-..,
2.Press the
%
key.
Memory-related characters appear on the display as
shown on P.42.
3.Rotate the dials and select the banks and channels that you want to
register by referring to the below chart.
•When registering on the main band, select the banks and the memory channels
with the lower and upper knobs of the main dial.
•When registering on the sub band, select the banks and the memory channels
with the lower and upper knobs of the sub dial.
When a memory channel is already registered,
MR
will be indicated on the
display.
·Banks
Select the banks according to your purposes.
The relationship with banks and memories is as follows:
0-4
Banks for normal memories.
PRG
Bank for Program Scan.
DUAL Bank for dual. The main band and the sub band are coupled and
registered in one memory.
PRIO Bank for priority.
CALL Bank. for Call Channel.
PASS Bank for Search Pass Memory.