Memory Mode; Recalling A Memory Channel - Alinco DR-620T/E Instruction Manual

Memory Mode

This mode allows recalling and operating the preprogrammed frequency or setting. This unit pro-
vides up to 200 memory channels (80 exclusive channels each for VHF and UHF, from 00 to 79CH
and 40 common channels for VHF and UHF, from 100 to 139), 1 CALL channel each for V and U
(C), 1 program-scan edge memory channel each for V and U (PL) (PH) and 1 VFO automatic
program setting channel (AL) (AH).

Recalling a memory channel

1.
Select the memory mode by pressing V/M key.
[00] appears on the display to indicate that the
unit is in the memory mode.
Repeat to switch the mode between memory
and VFO.
2.
Select a memory channel.
Rotating the main dial (pressing UP/DOWN
key) will increase or decrease a memory chan-
nel number by 1 channel step. For recalling a
memory on the SUB band, first switch the
MAIN band by the BAND key. When the SUB
side is in the memory mode or CALL mode,
[ ] appears on the display.
When recalling any memory number between
100 and 139, the display on the SUB side will
disappear.
IMPORTANT: If memory channels have not been programmed, the unit will not be
switched to the memory mode by pressing V/M key. Please read memory
channel programming on the next page.
Basic Operations
Memory channel
Memory mode
In case the SUB side is in the memory mode
19