Table of Contents
Advertisement
62
8.Functions Allotted to the Keypad
( 8-13 XBR(Cross Band Repeater) Mode
)
This mode allows the DJ-G29T to operate like a repeater using both Main and
Sub Bands.
That is, when receiving a signal on one band, the DJ -G29T automatically transmits
the same signal on another band simultaneously.
1.Set both MAIN and SUB frequencies/shifts/tones to the desired operating
setting.
2.Press
~
key to display
Ii
on the display.
liRl'T
3.Press and hold
@.IJ!l
Key for about 3 seconds to activate the XBR.
4.Repeat above to exit.
•
MEMO
•The MAIN band setting cannot be altered in XBR mode .
•Any combination of VFO, or memory channels can be set as
receiving and transmitting frequencies of the XBR as far as they
are within the transmitter' coverage.
·The XBR doesn't support digital modes such as packet.
·The XBR respects the offset direction and range settings of the
transceiver mode.
·The TOT function is usable but TOT penalty-time and BCLO
functions become deactivated during XBR operation.
•Cross Band Repeater is prohibited when MAIN and SUB are set for
Same band.
Advertisement
Table of Contents
