Table of Contents
Advertisement
10.SetMode
10-6·4 DTMF Burst Time
When the auto dialer is sending DTMF tones, they will be output by the burst
time set. The default is 80 milliseconds.
1.Rotate the upper dial and select "DTMF
burst time".
"DTMF burst time" will be displayed as shown
on the right.
Ii)
B S
(91
223.500
DTMF burst time
80ms.
FM
2.Rotate the lower dial and select the DTMF burst time in a range from 20
ms to 2 seconds.
[20ms-40ms-60ms-80ms-100ms-120ms-140ms-160ms-180ms-200ms-· · ·-2s]
10-6-5 DTMF Pause Time
When the auto dialer is sending DTMF tones, they will be output by the pause
time set. The default is 80 milliseconds.
1.Rotate the upper dial and select "DTMF
pause time".
"DTMF pause time" will be displayed as
shown on the right.
Bi]
a s@il
223.500
DTMF pause time
80ms.
'"
2.Rotate the lower dial and select the DTMF pause time In a range from 20
ms to 2 seconds.
[20ms-40ms-60ms-80ms-100ms-120ms-140ms-160ms-180ms-200ms-· • ·-2s]
85
Advertisement
Table of Contents
