Table of Contents
Advertisement
72
10.Set Mode
10-1-5 Font Size
You can switch the font size of the band that is not operated in dual indication.
1.Rotate the upper dial and select "Font
size".
(ii
65~
"Font size" will be displayed as shown on the right.
2.Rotate
the
lower
dial
and
select
"Small"<->"Large".
10-1-6 Font Bold
223.500
Font size
Small
You can change boldness of the fonts used to display numbers if desired.
1.Rotate the upper dial and select "Font bold".
FM
2.Rotate the lower dial and select the font boldness of displayed numbers.
When rotating the dial, the fonts change as shown in the illustration.
[
Bold all -
Op. band bold -
OP. band thin
-
Thin all
J
Bold all
All numbers will be displayed in boldface.
Op. band bold
Numbers on the operated band will be displayed in
boldface and numbers on the non-operated band will be
displayed in thin type.
OP. band thin
Numbers will be displayed in thin type on the operated
band and the numbers will be displayed in boldface on the
non-operated band.
Thin all
All numbers will be indicated in thin type.
10-1-7 Welcome Message Display
You may display up to any 16 alphanumeric characters on the DJ-G29T's screen
when it is powered-on as a "welcome" message.
1.Rotate the upper dial to select "Welcome/slide':
2.Press down the upper dial to enter to the edit mode.
3.Rotate the lower left dial to select how you prefer to show the message,
"Slide" or "Still".
4.Rotate lower right dial to move cursor.
5.Prease refer P.47 [Memory Name Function] tor how to
edit
the characters.
Note: Leave it blank to display the original DJ-G29T welcome image. You may use
either the original or customized message but can't skip the welcome
message display.
Advertisement
Table of Contents
