Table of Contents
Advertisement
46
7.Memory Mode
( 7-7 Quick Memory
J
This function is used to quickly recall memory channels most used in the Memory
mode. The Quick Memory are available up to 9 channels.
7-7-1 Registering the Quick Memory
1.Press the
IJ!i9
key to select the Memory mode.
2.Select the memory channel you want to register in the Quick mode.
~
CALL
3.Press and hold any key on the keypad from
\-U
to
19~1
for approximately
one second.
To release the Quick Memory, repeat steps
1
and
3
as shown above.
•
·When editing the memory channels registered in the Quick Memory,
the edited changes will be reflected in the Quick Memory.
MEMO
7-7-2 Recalling the Quick Memory
Wil.D
CALL
1.Press any key from
m
to
19~1
on the keypad.
2.Press the
IJ!i9
key.
•
·The Quick Memory can be recalled from any operation mode .
MEMO
( 7-8 Memory Skip Function
)
The Memory Skip function skips memory channels without receiving them when
memory scanning. This is useful in that scanning will stop on broadcast stations
and for memory channels that transmit modulated-carriers.
1.Press the
Ii}
key to select the Memory mode.
2.Select a memory channel that you want to skip.
*
3.Press the
@9
key.
MR
changes to
SKIP
on the left side of the display, and the Memory Skip
function will be set
Select the object memory channel and repeat the steps above to release the
Memory Skip function.
SKIP
will change to
MR
and the Memory Skip function will be released.
Advertisement
Table of Contents
