Table of Contents
Advertisement
8.Functions Allotted to the Keypad
( 8-14 RIT/TXIT Operation
)
RITfrXIT: RIT adjusts the receiving signal to fine-tune, TXIT adjusts the
transmitting signal so that fine-tunr to the receiving station's monitoring frequency.
This function is available only to Main band 902MHz operation in DJ-G29T.
[RIT setting]
1.Press
~
key.
Ii
appears on the display.
#RPT
2.Press
@!!}
key once or twice until [RIT] appears on the display.
3.Fine tune to the receiving frequency by rotating the upper dial. Adjustable
range is
+/-
1.SKHz in approx 600Hz steps.
~3
-
·2 -
.. 1 __,_
OFF -
+1 -
+2 -
+3
[TXIT setting]
Q:>,
1.Press
Cl-UV£)
key.
Ii
appears on the display.
2.Press
@JI
key once or twice until [TXIT] appears on the display.
3.Adjust the transmitting frequency by rotating the upper right dial.
Adjustable range is +/· 1.SKHz in approx 600Hz steps.
-3 -
-2 -
-1 -
OFF -
+1 -
+2 -
+3
Note: Both RITfrXIT will be reset and cancelled at power on/off of DJ-G29T and
can't be programmed in the memory channel data.
63
Advertisement
Table of Contents
