Table of Contents
Advertisement
10.Set Mode
•Auto Dialer output
The DTMF codes will be heard from the speaker, but will not be transmitted.
1.Repeat the previously described steps in the
Set
mode and select the code
you want to sound.
2.Press the
@}J
key after pressing the
~
key.
3.The DTMF code that is indicated on the display
will
be output from the
speaker.
If the DTMF code is not memorized, it will not be output from the speaker.
eAuto dialer transmission
1.Press the [PTT] key and begin transmitting.
Q-,,
2.Press the
\&N£)
key and "D" will appear on the display.
3.By pressing any key from
~to ~,the
DTMF codes registered in the
correlating DTMF memory will be automatically transmitted.
When a numerical key is pressed that has no DTMF codes registered, DTMF
codes will not be transmitted.
•Redial function
1.Press the [PTT] key, and begin transmitting.
Q-,,
2.Press the
\alN£i
key.
"D" will be indicated at the top of the display.
?RlO
3.Press the
CD
key.
The last DTMF code sequence (the DTMF code transmitted manually) will be
transmitted automatically. DTMF tones will be heard from the speaker.
0
CAUTIOtl
•If
there has been no DTMF output after shipping or resetting the
transceiver, the redial function will not operate.
·The timing relative to DTMF functions is set from "10-6-2" to "10·
6-4" is shown as follows;
MEMO
Start of transmission
The first number of
The second number of The third number of
the DTMF code
the DTMF code
the DTMF code
1\111'------il
wt#--·
I·
WAITTIME
+ +
+ + +
·1---
The burst period !or Pause period
Burst period
Pause
period
Burst
period
the first
n~Tlber
83
Advertisement
Table of Contents
