Table of Contents
Advertisement
10.Set Mode
( 10-4 TRANSMITTER
)
The operation settings concerning transmissions of this radio are explained in this section.
1.Select "TRANSMITTER" from the Set mode menu.
2.By pressing the dial, the sub menu will appear.
10-4-1
vox
This function allows transmitting without using the PTT by simply speaking into the
microphone. When you stop speaking, the unit will return to receive. At this state,
the PTT key operation is suspended.
1.Rotate the upper dial and select "VOX".
"VOX" will be displayed as shown on the
right.
2.Rotate the lower dial and select from the
VOX options.
Choose a microphone to be used, or OFF to
stop operating the VOX.
[
OFF
-
Internal mic
-
Option mic
J
[i]
es~
vox
OFF
223.500
'
M
3.Press FUNC to start operating the VOX. RX Disabled will appear on the display.
([I
While operating, press down the dial twice. VOX level appears. Rotate the dial to
adjust the level between 1 (low gain) and 7 (sensitive).Select level Oto temporally
suspend the VOX operation. Press the dial once to resume VOX operation. Enter to
the set-mode, repeat sequence, and set the VOX OFF to quit VOX operation.
0
CAUTION
·VOX can't be properly operated in noisy place by picking up the noise.
·While operating VOX, the tone-calls, DTMF, auto-dialer and Sub-band
receive are not functional.
77
Advertisement
Table of Contents
