Table of Contents
Advertisement
42
7.Memory Mode
•Memory Registration related displays
•
MEMO
""""'
·~-:- "'T'"'~~. ~
Memory channel
o 0R2
2 2 3 5 0 0
Number of bank
F M
·Expanding the total number of memory cannot be done .
·Registered memory channels can be displayed in alphabet letters,
symbols, numeric,
hiragana, katakana and Chinese characters
instead of frequencies. Please read "Memory Name Function P.47)" for
details.
•Recalling a memory channel can be done either by dial operation
or keypad input.
( 7-3 Recalling Memory Channels
)
!MiC
1.Press the
(!ifiJ
key to select the Memory mode.
/>.
6
2.Press either the
(iiJ
key or the
fiiJ
key to select the memory bank you want
to recall.
3.Rotate the dial and select the memory channel.
0
CAUTION
•When recalling data in the bank for dual, switching between the
main band and the sub band cannot be done.
·Frequencies outside the range of the main band can't be indicated
on the main band with the memory channel registered in the sub
band. Please read the range of frequencies for the main band in
"Reception (P.36)".
Example: When recalling 223.500MHz registered in 002 channel In bank 1 In
the main band:
1.Set the main band as the operation band, and select the Memory
mode by pressing the
l!fJ9
key.
2. Press the
riiJ
key and set it to bank "1 ".
3.Rotate the upper dial and set the channel to "002". The information
registered in the memory channel will be displayed.
Advertisement
Table of Contents
