Table of Contents
Advertisement
9.Convenient Functions
( 9-2 Scan Function
J
This is a function that automatically scans and searches for transmitted signals.
VFO-Scan
Scans all frequencies In the selected band by the previously set
Channel Step in the VFO mode.
Memory-Scan
Scans only the frequencies registered in the Memory mode.
Program-Scan
Scans between the highest and lowest frequencies in a
selected range. "Program scan mode (P.36)"
•These operations are common to all scanning modes:
•If you press the [PTT], ~ ,
Ii/!)
or the
t!/iTiJ)
keys, scanning will stop.
·By rotating the dial when scanning, the direction of the scan {up or down} can be
changed.
·By operating the Monitor function while scanning, scanning temporarily stops.
When the Monitor function is released, scanning starts again.
•The direction of scanning (up or down} is determined by the direction scanned
last. (However, in the case of Program-Scan, scanning starts from the registered
00Ato00B)
·The parameters of scanning operations can be set. Please read "Scan Mode
Settings (P.90)" to learn how to change settings.
( 9-3
VFO-Scan
J
1. Press the
l!fJ9
key and set the VFO mode.
2.Rotate the upper dial while pressing the
i1fj3
key and select the "VFO
Scan".
&...vv
3.Scanning will start when the
key is released.
The decimal indicator of the displayed frequency will blink when scanning.
Q,,,
~
f1,..VO
4.When the [PTT],
~
,
l:!!!!I
or the
§iii
!Kl
, , tiil
key is pressed, scanning will stop.
'<IFO
2 2 3 . 5 O O
F.
VFO SCAN
65
Advertisement
Table of Contents
