Table of Contents
Advertisement
74
10.SetMode
2.Rotate the lower dial and select the time the transceiver is on and the time
it is off for battery saving.
When the BS ratio is on,
BS
will blink on the display.
By rotating the dial, the BS ratio will switch as shown in the illustration.
0.2: 0.4
L
Batt. save off - - 0,2. ; 0.2 - -
0.2 ; 1.8
- - 0.2. : 1.2 - - 0.2 : 0.8 (default)
(unit:seconds)
•When shipped from the factory, the BS ratio is set to 0.2 seconds : 0.8 seconds.
It is not necessary to turn this function off in normal situations, but turn the BS
function off when using the transceiver for packet radio communications.
•The BS doesn't operate while receiving signals or when scanning.
•If you set the battery save time ratio longer, the beginning of received audio may
be lost.
10-2-3 Battery Type
This setting is used to indicate the proper battery-level on the displayed icon.
1.Rotate the upper dial and select "Battery
type".
m
asliil
223.500
"Battery type" will be displayed as shown on
the right.
Battery type
Battery pack
2.Rotate the lower dial and select "Battery Pack"+->-"Dry Cells".
0
. CAUTION
l••I
C••I
•.If this setting is not appropriate, the battery-level (the remaining
charge) will not be properly shown on the display. However, an
incorrect setting of this parameter will not interfere with the normal
operation of the transceiver.
Advertisement
Table of Contents
