Table of Contents
Advertisement
Ill
92
10.Set Mode
10-9-5 Backlight Setting While Scanning
The display and keys can be illuminated when scan stops in the scan mode. This
is useful for scan operation in the dark.
1.Rotate the upper dial to select [Scan lamp
J.
2.Rotate the lower dial to select [ON] or [OFF] of the function. When [ON] is
set, the display and key illumination
will
be lit at each squelch-opening
during scan operations.
Note: The [Always lit] parameter in illumination setting mode (P.71) will be
disregarded and illumination turns off when [ON] is selected in this menu.
The illumination stays lit until the scan resumes in accordance with the scan
mode setting. Stop scanning to turn off the backlight.
Advertisement
Table of Contents
