Removing The Battery Pack - Alinco DJ-G29T Instruction Manual

222/902mhz dual band fm transceiver
Hide thumbs Also See for DJ-G29T:
Table of Contents

Advertisement

3. Installing Accessories
3-4-2 Removing the Battery Pack
1.Slide the latch at the bottom of the battery
pack in the direction of the arrow (1), and
remove the battery pack (2).
0
CAUTION
•The battery pack is not fully charged when shipped. It must be
charged before use. Charging should be conducted within a
temperature range of 0°C to +45°C (+32°F to +104°F).
•Do not modify, dismantle, incinerate or immerse the battery pack in
water as such actions can be dangerous.
•Never short-circuit the battery pack terminals, as this can cause
damage to the equipment or lead to overheating the battery which
may cause burns.
·Unnecessary prolonged charging (overcharging) can deteriorate
battery performance.
·The battery pack should be stored in a dry place where the
temperature range is within -10°C to +45°C (·14°F to +113°F)
.Temperatures outside this range can cause the battery liquid to
leak. Exposure to prolonged high humidity can cause corrosion of
metal components.
•The battery pack is a consumable part. When its operating time
becomes considerably short after a normal charge, it is likely the
pack is exhausted and should be replaced with a new one.
·The battery pack is recyclable. When its useful life is over, it should
be recycled by taking it to your local waste management or recycling
facility.
·Wipe off dirt and condensation from the surface of the transceiver,
battery pack and charger with a soft, dry cotton cloth periodically.
·If you're not using the battery pack for an extended period, charge it
once every 3 months to prevent deterioration of the batteries.
21

Advertisement

Table of Contents
loading

Table of Contents