Table of Contents
Advertisement
8.Functions Allotted to the Keypad
8.Functions Allotted to the Keypad
The functions printed at the top of respective keys are allotted to those keys on the
DJ-G29T. Press the~ key and light
IJ
on the display and press the keys to
select the allotted functions. Press PTT to complete and go back to operate.
[ 8-1 Shortcut Function
J
Spontaneous menus in the set mode can be assigned to the [MONI] key and
!!!!II
the
tQ
key.
1.Light the
II
on the display by pressing the
~
key.
!W!.o
2.Recall the assigned function by pressing either the [MONI] key or the
Q:)
key.
3.After following the above steps, the functions executed are the same as the
f.m,
operation executed when in the set mode.
L:m
Please refer to "Short-cut (Wild) key Settings (P.96 )" to register the desired
operations.
[ 8-2 Transmitter Output Setting
)
You may select the power level used when transmitting. A lower power setting
decreases the range but extends the amount of operating time by preserving
battery power. When transmitting directly to a nearby station or through a repeater,
it is best to use a lower power setting.
1.Press the
C:~
key and light
II
on the
display.
2.By pressing the
~
key, [Transmitting
output] will be displayed.
3.Rotate the upper dial and select the
transmitting output from three levels.
[Transmitting output] will increase in the order
of [Low Power}-+[Middle Power]->[High Power].
Im
a s
(ii]
223.500
TX POWER
Low Power
'"
51
Advertisement
Table of Contents
