Deleting Memory Channels - Alinco DJ-G29T Instruction Manual

7.Memory Mode
( 7-4 Deleting Memory Channels
1.Set the "Over Write Function (P. 89)" to "accepted" or "fail-safe".
2.Press the
l!#J
key to select the Memory mode.
3.Select the memory channel that you want to delete.
4.Press
the~
key and the
Iii
is shown on the display.
*
5. When the @key is pressed, an indication
of confirmation will be shown (see the
illustration in the right).
Ill asO
#RPT
~-~
2 2 3. 5 0 0
CLEAR
-+
ENT key
Cancel _,. Other
'"
6.When the @Ykey is pressed, the contents
of that memory channel will be deleted. If
any other key is pressed, the operation
will be cancelled.
0
CAUTION
•Data can't be recovered once it is deleted. Please. be careful not
to delete necessary data by mistake. The free utility allows you to
save different memory channel data for back-up purposes.
·After deleting data, set the
"Over
Write Function (P.89)" back to
"prohibited" in order to protect important data.
•If you execute the "All Reset (P.102)", all data will be deleted.
J
••
•When turning the transceiver on while the
Over
Write feature is
set to "fail-safe", it will automatically be reset to "prohibited".
MEMO
43